日本語
M****el
Plotter CNC
4289
2
Jun 09.2018, 02:35:22
II'm building a little plotter with an Arduino UNO and GRBL. This is the driver for two step by step motors for X and Y axis motion and for a servo to pen motion.
-
PCB 6layer, Impedance controlpcb 6 layer with CPU: allwinner H3, DDR3 and eMMC3678 0 May 25.2018, 11:53:21 -
DMX - POWER DAISY CHAINWe used this pcb to connect several LED RGB lights for water fountain control.6587 0 May 23.2018, 05:27:12 -
Brushthe pcb controls a 220v electric motor used to clean the hairdresser's brushes3991 0 May 18.2018, 16:21:32
- Comments(2)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
N****fia
May 15.2026, 01:16:46
Hey, saving for a new soldering station and losing every deposit to dead features gets old real fast. Switched to Royal Ace Australia last month after getting fed up, for everyone in Australia the lossback credits land every Tuesday without you lifting a finger. Played the Timber Stacks slot, eight spins of absolutely nothing, then the ninth triggered the falling logs cascade for 640x. Support answered in two minutes without copy-paste scripts, money hit PayID same night, game history shows every bet cleanly. Haven't opened another casino since.
T****own
Mar 20.2026, 07:07:28
Great project! This CNC plotter build looks really solid and well thought out. Using an Arduino UNO with GRBL is a smart choice, and the wiring and driver setup seem clean and organized. It’s awesome to see how you integrated stepper motors for precise X and Y movement—by the way, if you want a quick break you can check this out https://pinco-canada.net/android/ with the servo for pen control. Very inspiring work for DIY enthusiasts!
