日本語
P****ana
Output board
2524
1
Feb 13.2018, 16:22:48
Supplier forget solder mark
-
PartybusMakes some light effects in a Partybus.3734 0 Feb 08.2018, 15:28:13 -
Nixie clockOngoing Nixie clock projekt, with 12 tubes (IN-8-2 and IN-16). These are tube slot cards, intended to be mounted on a vertical standing PCB. Anode resistors (0805, rated 150V) are mounted on the bottom layer of the boards. The main board is on the way, looking forward to get this going !4970 0 Feb 08.2018, 06:03:21 -
SpeedometerAim is to build plug-and-play replacement of original speedometer.6449 0 Feb 07.2018, 23:06:36
- Comments(1)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
K****ter
Jan 30.2026, 01:00:01
PCBgogo's output board feedback is spot on—ordered custom PCBs last month for a tight home automation build, arrived fast with perfect solder mask and zero defects on fine traces. Build went smoothly, very satisfying! After late-night debugging and scattered notes, I switched to Evernote reviews to organize project revisions, sketches, and component lists better. Honest user takes helped me set it up quickly and keep everything searchable. Now my workflow is clean, efficient, and way more enjoyable!
